Safety Hardware Store

Liquid Nails Adhesive for Small Projects & Repairs/Interior, Low Solvent/High Strength – 4 fl oz

  • Fast-bonding
  • Permanent
  • Weather resistant
  • Resealable cap /precision applicator
  • Sandable
November 2017TubePaste
The Liquid Nails adhesive is an efficient construction-grade adhesive that provides fast bonding. This weather-resistant and permanent adhesive works on surfaces like soap dishes, wall tile, towel racks, house numbers, corkboard, vinyl cove base, drywall, aluminum, concrete, stone, house numbers, ceramics, and more. It features a resalable cap that prevents the glue from drying and doubles up as a precision applicator. Use this paintable/stainable adhesive where hammer and nails cannot be used. 4 fl oz squeeze tube covers 45 lineal ft. Do not use with sheet goods, ceiling applications, wood flooring, and underwater applications. Contributes to LEED certification and NAHB National Green Building Standard certification. GREENGUARD Children & Schools Certification.
Units in Package

1

Unit Size

4 fl oz

Directions

Please research all installation instructions and read entire label for safety, health & environmental information prior to use. Surfaces must be clean, dry and structurally sound. Apply in well-ventilated area. Carpeting: Keep loose carpet edges down by applying a bead of adhesive to carpet back. (Use sparingly for easy carpet removal later on.) Ceramic and Other Tile: For mirror tiles, apply a ribbon of adhesive to back of tile and press firmly into place. For decorative tiles, wall inlay panels or cork tiles, apply 3 or 4 ribbons of adhesive to wall and press tile into place. Heavy tile may require bracing for 24 hours. Wood: Apply a bead of adhesive to the back of trim and press into place. For wood strips, apply 2 ribbons of adhesive to the back of each strip and press into place. Countertops: Secure peeling countertops by applying adhesive to base and pressing firmly. Use a clamp to temporarily hold the countertop in place. Drywall: To serve as a backing for drywall, adhere strips of wood 3 inch longer than the hole behind the opening with adhesive and allow to dry 24 hours. Then use adhesive to affix properly sized patch to the wood backing strips and finish edges in the conventional manner. Vinyl Cove Base: Apply 2 beads of adhesive to back and press firmly to wall. Shelving: Apply a bead of adhesive to back of brackets. Press brackets firmly against wall. Pull assembly apart and let air-dry for 5-8 minutes, allowing the adhesive to set. Press brackets back into place and hold with masking tape for 48 hours. Working Time: Sets up quickly, yet allows repositioning up to 20 minutes after application. Allow approximately 24 hours to dry. Clean-Up: Use adhesive caulk remover or mineral spirits. Disposal: For instructions please call 800-634-0015.

Warnings

Danger! Flammable. Harmful or fatal if swallowed. Harmful if inhaled. May cause central nervous system effects, including dizziness, headache or nausea. Causes eye, skin and respiratory tract irritation. Use only with adequate ventilation. Keep out of reach of children. Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. This product contains a chemical known to the state of California to cause cancer. Contains Crystalline Silica. If sanding, wear a dust mask to avoid breathing of sanding dust. Keep away from heat, sparks and flame. Do not smoke. Vapors may ignite. Vapors may spread long distances. Extinguish all flames, burners, stoves, heaters and pilot lights and disconnect all electrical motors and appliances before use and until all vapors are gone. Do not breathe vapors. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. Avoid contact with eyes and skin. Close container after use. First Aid: For skin contact, wash thoroughly with soap and water. If any product remains, gently rub with petroleum jelly, vegetable or mineral/baby oil, then wash again with soap and water. Repeat as needed. Remove contaminated clothing. For eye contact, flush immediately with plenty of water for at least 15 minutes. Get medical attention. If swallowed, get medical attention immediately. If inhalation causes discomfort, remove to fresh air. If discomfort persists or any breathing difficulty occurs, get medical attention. For emergency information, customer service, MSDS or additional safety and chronic hazard information, call 800-634-0015. Keep from freezing.

Reviews

There are no reviews yet.

Be the first to review “Liquid Nails Adhesive for Small Projects & Repairs/Interior, Low Solvent/High Strength – 4 fl oz”

Your email address will not be published. Required fields are marked *

Product Enquiry

0
    0
    Your Cart
    Your cart is emptyReturn to Shop